Blogs

How do you enhance the experience of cold brew coffee, already extraordinary on its own? One of the best ways to make cold brew is with the Kyoto M...

Espresso Parts & Streamer Coffee Present #TNTJP 2K14 We had the extreme pleasure of sponsoring another installment of #TNTJP! This event was special for a couple of reasons, it served as the unofficial kick-off party for SCAJ and it was the first #TNTJP at Streamer Coffee’s newest location in Gohongi. We had even more people show […]

The Latte Art Throwdown League 2016 Across the globe from EP Headquarters, tucked in Petaling Jaya Malaysia is a group of passionate barista’s known as The Latte Art Throwdown League organized by Kuala Lumpur Coffee Collective. On January 11th at 8pm at Mollydookers Coffee, the 2016 group began competition. The league hosts 16 contestants, 6 rounds […]

Thursday EspressoParts sent a team to Slate Coffee in Seattle for the monthly TNTNW. Slate is a great coffee bar with loads of talent and knowledge. Good people. We crowded the small cafe. It was hot. It was tight. It was awesome. Thursday afternoon the EspressoParts team hit the road, prizes in tow. It’s an hour’s drive from […]

Publishing the new Flying Portafilter Demitasse post earlier reminded me that we hadn’t blogged our newest barista inspired shirt design.  Act now and you can be the first barista on your block to have one. They are moving fast so get yours now before this first batch is gone. These t-shirts are American made, printed […]

Designed by Canadian inventor and designer Tom Littledeer, this beautifully carved utensil has a fluid form inspired by canoe paddles. Each one is handcrafted from a single piece of North American maple and is shaped, polished and signed by hand. Maple Wood Coffee Paddle Specs: Specifically designed as a flexible stirrer that will not break […]

It’s already February…so we decided to put some great stuff on sale.  For the month of Febrewary our hemp filters will be specially priced and Bonavita Brewers will be shipped free (free shipping for domestic ground).  We will also have weekly deals, the first is the small Beehouse Dripper. You can easily brew coffee for two […]

We added some photos of a custom La Marzocco GS2 build we are performing for The Grounds http://flic.kr/s/aHsjwTD5hE

We are currently still out of stock on the Espresso Parts Sproline Screens however we have recently worked up a nice little cut away illustration for your enjoyment. If you would like to be notified when our Sproline Screens are back in stock, please sign up in the space provided on the product page and […]

While we were sleeping this morning Espresso Parts Korea was holding their first #TNT. It was really great working with our associates in Korea to plan this event! We also had to send them some amazing custom tamp trophies. By the looks of it they had a great time. Big props to Espresso Parts Korea for […]

Olympia, WA– We’re beyond stoked to announce, Espresso Parts Porcelain Collection has been selected as the official cup sponsor for the World Barista Championship and the World Brewers Cup! Competitors may throw down their drink with our stylish Tulip Cappuccino! Plus you might just spot our sturdy Diner Mug hanging about during the WBrC competition, […]

Have you ever considered customizing your espresso equipment but weren’t really sure where to begin? If so, you’re not alone. Over the last few years there has been an increased demand for custom modifications on espresso machines and grinders, so much so that customization projects have earned a permanent place in equipment budgets of most startup cafés and restaurants. A customized piece of equipment can become the focal point and theme setter for your entire business, not just a necessary bar tool.

We just published the product pages for a limited run printed demitasse cup project. We’ve had both our Brown/White and White Porcelain Demitasse Cups in both the traditional and tulip shape printed up with are famous EP Skull print. If you act soon you can piggy back a few of these bad boys onto an […]

Espresso Parts had the pleasure of working with Roast Magazine & Imbibe Magazine at Spirit of 77 in Portland, Oregon for the 2012 SCAA! Here’s our staff “working” the manual brew bar! Song: “The Shining Path” by RJD2.

Espresso Parts really wanted to throw a party to celebrate the anniversary and thank everyone that make the series a success…YOU! We mixed things up this time and held the event outdoors in our parking lot. How does one throw an outdoor latte art throwdown in a parking lot???? Well with help from Slate Coffee and […]

Top The Espresso Parts Rinser has been helping professionals save time, money, and water for nearly 5 years now! Our newest build represents everything we’ve learned and includes a number of key feature enhancements. Our Rinser is not just for steaming pitchers, it works with pitchers, glasses, bar wares, any vessel with a diameter of […]

I met Richard Sandlin a couple of years ago at Barista Camp. We hit it off and have stayed in contact. He’s a pretty rad dude making some great moves down in California. Richard hit me up a few months ago regarding a new competition series he wanted to start in the Bay Area. Of […]

SCAA 2014 Featured Items Introducing the SCAA Cupping Bowl by Espresso Parts! Espresso Parts is proud to announce that we have worked in cooperation with The Specialty Coffee Association of America to produce the next generation of cupping bowls. These cupping bowls meet every standard set forth by the SCAA to the last detail. Through hard work and […]

We may not exhibit at Coffee Fest but Espresso Parts definitely had a strong presence. Between our third annual #TNTNW Coffee Fest Kickoff at Neptune Coffee & The Nightcap event held at Liberty Bar we were pretty busy. We sent Panda our Community Coordinator up to Seattle to cover all the action at and away […]

Did you know that the SCAJ (Specialty Coffee Association of Japan) is holding their annual event this week? It’s true! We partnered with our very good friend Hiroshi Sawada of Streamer Coffee to celebrate with another #TNTJP. The event took place at Streamer’s Shibuya location and over 300 people showed up! Attendees we’re treated to […]

Brewing With Espresso Parts: Hermiston Brewer Espresso Parts is bringing affordable, metal-filtered pour over coffee to the masses!  The star of the show with the Yama Hermiston is the flat bottom stainless steel filter. On the inside of the filter you have a fine mesh that will keep sediment to a low and larger mesh on […]

Espresso Parts Presents #TNTNW @ Dillanos Coffee Roasters We had such a great #TNTNW at Dillanos last week! They really know how to throw a party. Did I mention it’s also their 22nd anniversary this year? The event took place at their newly jazzed up  HQ in Sumner, WA. Our judges for the evening were: Bryan […]

Espresso Parts Presents #TNTNW @ Batdorf & Bronson Olympia’s very own Batdorf & Bronson opened their doors for May’s #TNTNW. The house was packed and we had a couple of coffee stars in the house too! U.S. Barista Champion Laila Ghambari took time out of her hectic schedule to judge the night’s pours and Amanda Juris who […]

Espresso Parts is incredibly excited for this weekend! Not only do we have two booths at SCAA but we are also Bronze sponsors of the World Barista Championship and the official porcelain sponsor of the WBC. There’s a lot going on so we’re going to get you up to speed with all things EP SCAA2015 with this post! […]

Espresso Parts Presents #TNTNW at Ristretto Roasters Last week the Portland coffee community came out in full effect for #TNTNW! Techs, baristas, roasters, owners, and a bunch of really awesome folks showed up to pour their hearts out. We gathered at Ristertto’s gorgeous Nicolai location. The cafe is situated in the historic Schoolhouse Electric Building formerly the Pacific […]

Espresso Parts Presents #TNTNW at Victrola Coffee What a night! Our #TNTNW at Victrola Coffee was a fantastic kickoff to the 2015 season! There were baristas as far as the eye could see. Once again we filled our 32 spots in under TEN minutes!!!!! Luckily there was plenty of Jameson Whiskey to go around as well […]

  Espresso Parts Custom Shop x All Day Roasting Company This Custom Shop project looks like it might race off of the counter at any moment. We were approached by All Day Roasting Company in Taipei City about a one of a kind custom Mazzer Robur. All Day decided on a carbon fiber print for the grinder body and hopper with […]

Espresso Parts Custom Shop x The Hangar Cafe / Build #47 You are clear for take off! What you see before your eyes is a thing of wonder. This one of a kind EP Custom Shop GS/GB5/GS3 mash up for Singapore’s The Hangar Cafe is like nothing we’ve ever done before. The inspiration for this project came […]