Details
3/8" John Guest to 1/4" BSPT Male Adapter
This fitting threads a 3/8" John Guest push-in tube line into a 1/4" BSPT tapped port, commonly needed at espresso machine water inlet valves and boiler fill solenoids.
SPECIFICATIONS
- 3/8" John Guest push-in x 1/4" BSPT male tapered thread
COMPATIBILITY
- Fits: 3/8" OD push-fit tube systems needing to thread into a 1/4" BSPT tapped port - common on espresso machine water inlet valves and boiler fill solenoids
INSTALLATION
DIY - the BSPT thread is tapered and self-seals with PTFE tape; the push-fit side needs no tools.
PRO TIPS
- BSPT threads seal on the taper itself, so two or three wraps of PTFE tape (wound clockwise as viewed from the pipe end) is normally all you need - avoid cranking it down past hand-tight plus about a turn and a half, or you risk cracking the fitting boss.
Customer Reviews
Attention CA Residents: Prop 65 Warning
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.