Precision 56.5 mm Group Head Screen - Non-welded - 200 micron - CA_34

IMS Precision Non-Welded Group Screen - 56.5mm, 200 Micron

This is a genuine IMS (MA 200 IM) shower screen for espresso groups that use the non-welded, screw-retained screen design rather than a pressed-in disc. The tightly perforated 316 stainless membrane spreads water evenly across the puck face, which is exactly the kind of detail that separates a properly dialed-in shot from a channeled one.

SPECIFICATIONS

• Outside diameter: 56.5 mm
• Central hole: 7 mm, with 98 perforations at ø 3 mm
• AISI 316 food-safe stainless steel with integrated 200 micron membrane

COMPATIBILITY

• Fits: select La Marzocco, Slayer, Carimali, and Synesso group heads that use the 56.5mm non-welded, screw-retained screen style — not all models within these brands use this design, so confirm your existing screen matches before ordering
• Replaces: IMS MA200IM / MA 200 IM
• Works with: the OEM retaining screw for your group head

INSTALLATION

Straightforward DIY swap, but installation technique matters more than usual with this screen — it's a five-minute job that's easy to get slightly wrong.

PRO TIPS

• Snug the retaining screw down just until the screen stops moving — do not crank it. Over-tightening warps the screen, and a warped screen won't seat flush against the group gasket, which shows up months later as channeling that seems to come out of nowhere.
• After installing, run water through the group with the screen in place and watch the flow pattern; it should come through evenly across the whole face, not concentrated toward one edge.
• Full IMS specs and dimensional drawings are available here if you need to cross-check against your current screen before ordering.